5 Star Google Reviews
Gas Stove & Range Installation in McMinnville, Oregon | Cook With Real Flame, Installed Safely
Gas stoves and ranges give you instant heat control that electric cooktops can't match, and installing one is simpler than most McMinnville homeowners expect. Your Fireplace Pros handles gas stove and range installation across McMinnville and Yamhill County, including new gas line runs for electric-to-gas conversions. We connect the appliance, test every fitting, and make sure the installation meets Oregon code. 262+ Google reviews at 4.9 stars. 26 years local. Oregon CCB #36-82C.
Gas Stove and Range Installation for McMinnville Homes
Gas stove and range installation in McMinnville is either a straightforward swap or a conversion project, depending on whether your kitchen already has a gas supply line. If you’re replacing an old gas range with a new one, the installation is usually a matter of disconnecting the old unit, checking the gas connector and shut-off valve, and hooking up the new range. The gas supply is already in place.
If you’re converting from an electric range to gas, the scope is bigger. You need a gas line run from the nearest gas supply point to the range location, a new shut-off valve behind or beside the range, and the proper flexible connector to hook up the appliance. In McMinnville homes with crawl space access, routing a gas line to the kitchen is typically straightforward. The pipe runs under the floor from the meter or an existing branch line and comes up through the floor behind the range location.
Gas ranges require a standard 120-volt outlet for the clock, lights, and ignition system, even though the burners and oven run on gas. If your kitchen only has a 240-volt outlet (from the electric range), you’ll need that circuit converted as well. We coordinate the full scope so you’re not calling an electrician separately.
For homes in McMinnville and Newberg on NW Natural gas, the installation connects to the existing gas service. For rural Yamhill County properties on propane, the range needs to be configured for LPG fuel (most ranges ship set up for natural gas and require an orifice conversion kit for propane). We handle the conversion and verify burner performance on the correct fuel type.
One detail that catches homeowners off guard: freestanding gas ranges need an anti-tip bracket installed. Oregon code requires it, and it prevents the range from tipping forward if someone steps or leans on the open oven door. We install the bracket as part of every range installation.
When It’s Time for Gas Stove & Range Installation
You’re replacing a gas range and the flexible connector or shut-off valve is old, corroded, or doesn’t meet current code. Gas connectors have a limited service life, and older brass connectors should be replaced with newer stainless steel braided ones during any range swap.
You’re converting from electric to gas because you want the instant heat control, visible flame adjustment, and faster boil times that professional and home cooks prefer. This requires a new gas line to the kitchen.
You just remodeled your McMinnville kitchen and relocated the range. Moving a range more than a few inches from its original position usually means the existing gas connector won’t reach and a new line extension or connector is needed. Don’t stretch a gas connector to reach.
What's included
What Gas Stove and Range Installation Covers
Gas Supply Verification or New Line Run
We check the existing gas supply at the range location. If a gas line is already in place, we inspect the shut-off valve, connector condition, and supply pressure. If there's no gas supply (electric-to-gas conversion), we run a new gas line from the nearest branch or the meter, sized for the range's BTU demand.Appliance Connection and Safety Hardware
We connect the range using an approved flexible gas connector with a proper shut-off valve at the point of use. The anti-tip bracket gets mounted to the floor behind the range per Oregon code. We level the range, verify all burners light correctly, check the oven operation, and confirm there are no leaks at any connection.Testing and Inspection
Every gas connection is leak-tested after installation. If the project required a new gas line run, the full line is pressure-tested and we coordinate the Yamhill County mechanical permit and inspection. For a simple range swap on an existing line, a permit may not be required, but we test the connection regardless.Trust
Why McMinnville Homeowners Choose Your Fireplace Pros for Range Installation
A gas range connection seems simple until you realize the gas connector is the wrong type, the shut-off valve is seized, or the line feeding the kitchen was sized for an old, low-BTU stove that’s nothing like the 60,000-BTU commercial-style range you just bought. We’ve installed gas ranges in McMinnville kitchens ranging from 1930s downtown homes with original gas piping to brand-new builds in the Granary District. The details are different every time, but the process stays the same.
- Full-scope gas installation including line runs, connections, anti-tip brackets, and code compliance, not just a hookup
- Experience with both NW Natural gas and propane conversions across McMinnville, Newberg, Dayton, and rural Yamhill County kitchens
- Oregon CCB Licensed (#36-82C) with 262+ Google reviews at 4.9 stars and 26 years serving the area
5 Star Google Reviews
McMinnville Homeowners on Their Kitchen Gas Installations
Our 4.9-star rating across 262+ Google reviews includes homeowners who brought us in for kitchen gas work, from simple range swaps to full electric-to-gas conversions. The common thread in the feedback: the range works perfectly, the connections are clean, and the job was done on schedule.
Tim was great!
Very personable.anawering.our concerns and question.
Always friendly
They do a great job and clean-up
They do a great job and clean-up
Tim was wonderful, explaining every step he was taking. I appreciate that very much.
Your men were and are very good at what they do. They did their jobs on my pellet stove very good. I could tell they loved their work and had a wonderful attitude in doing their work. I will look forward to seeing them next summer when they come to service my pellet stove. Thanks for sending them.
They did a great job. I'd recommend them to anyone needing a job like this to be done. Thank you!
Simpson is always great to work with, from the office staff, and the estimators and especially the techs. They have earned my trust and continued business.
Great experience. They help brighten our exterior space. Looks great.
Quick diagnos of problem. Friendly and professional.
They responded quickly and professionally, and managed to squeeze me into their busy schedule the next day, despite being busy for the next two weeks. Fortunately our repair was fairly straightforward, just a new thermocoupolar on an gas old stove. They arrived on time, finished within an hour, were professional and very reasonably priced. I would definitely recommend!
received quick service on gas fireplace, good job!
Amy did a great job! Good looking work.
Aimee was absolutely awesome. On time, quick and very friendly. I will recommend your service to all my friends and contacts.
Thank You so much!!
Thank You so much!!
Great work! Thanks
Great company, got a quick response to a problem I had. He also pointed out other things that would be required to be fixed if I sold the property.
I will surely be using them for any other jobs that come up.
I will surely be using them for any other jobs that come up.
Very pleased with the service. The technician that came over to do the work was meticulous in her work and excellent in trouble shooting skills.
Outstanding service! Prompt, awesome work.
Ken was awesome and made sure the job was done right. It was a challenging project but it looks amazing. Highly recommend!
Once again, very professional and thorough service from Ken and Ceray. Thank you !
Aimee was thorough and efficient. She was also easy to communicate with.
Great service! Friendly staff and very efficient.
Good service
On time, friendly, efficient, informative.
Service areas
Gas Installation Across McMinnville, Newberg, and Yamhill County
Your Fireplace Pros provides gas installation service throughout Yamhill County and the surrounding Willamette Valley. Our shop is based in McMinnville at 4230 NE Hawn Creek Rd, and we work in Newberg, Dundee, Carlton, Dayton, Lafayette, Amity, Sheridan, Willamina, and Yamhill regularly. Whether your home is on the NW Natural gas grid in town or on a propane tank on a rural property, we carry the fittings and equipment for both fuel types and can handle installations anywhere in our service area. Newberg residents often find us a more responsive option than waiting on a Portland-area plumber or gas fitter who treats the Yamhill County drive as a day trip.
Gas Stove and Range Installation Questions
Contact usHow much does it cost to install a gas range in McMinnville?
If you already have a gas supply line at the range location, a straightforward connection typically costs $200 to $500 for labor and materials (connector, shut-off valve, anti-tip bracket, leak test). If you need a new gas line run from the meter, add the cost of the gas line installation based on the length and complexity of the route. Call +1 503-550-4027 for a quote specific to your kitchen.
Can I convert from an electric stove to a gas stove?
Yes. You’ll need a gas line run to the range location and the 240-volt outlet converted to a standard 120-volt outlet. For McMinnville homes with crawl space access, the gas line usually runs under the floor from the meter or an existing gas branch. We handle the full conversion.
Do gas ranges need to be vented?
Residential gas ranges in Oregon don’t require a dedicated exhaust vent to the outside, but a range hood that vents externally is strongly recommended. Gas burners produce combustion byproducts (including small amounts of carbon monoxide and moisture), and an externally vented hood removes them from the kitchen. A recirculating hood with a charcoal filter is better than nothing but doesn’t remove combustion gases.
Can I install a gas range on a propane system?
Yes. Most gas ranges ship configured for natural gas and include an LP conversion kit in the box. The conversion involves swapping the burner orifices and adjusting the regulator. If the conversion isn’t done correctly, burner flames will be too high (dangerous) or too low (poor cooking performance). We handle the LP conversion and verify every burner on your Yamhill County propane system.
Do I need a permit to install a gas range?
If the installation involves new gas line work, yes. A range swap on an existing gas supply may not require a permit in Yamhill County, but any new gas line run triggers a mechanical permit and inspection. We advise on the permitting requirements during the quoting process.
How long does gas range installation take?
A range swap on an existing gas line takes about an hour. An electric-to-gas conversion with a new gas line run typically takes a half day, depending on the length of the line and access conditions under the McMinnville home.
Ready to Switch to Gas in Your Kitchen?
Whether you’re swapping out an old range or converting your McMinnville kitchen from electric to gas, the installation is faster and easier than you think when someone handles the gas work correctly. Call us and we’ll walk you through the scope and cost for your home.